Installing The Adapter for Dynamics NAV

When a new version of TIBCO Scribe® Insight is released, the adapters are installed from the TIBCO Scribe® Insight Installer. Releases are installed from the TIBCO™ eDelivery site.

Before installing the Adapter for Dynamics NAV:

Note: You must install the correct Dynamics NAV NAS component for your version of Dynamics NAV first. For more information, see Installing The NAS Components.

  1. Keep in mind that you need to install the Adapter for Dynamics NAV on the Insight server and on all computers or workstations that will be connecting to the adapter.
  2. Open and read the Release Notes for the Adapter for Dynamics NAV. You can find these documents on the TIBCO Scribe® Insight Help Release Notes page
  3. Make sure you have connectivity between the Insight Server and the NAS Server.
  4. Determine how to install the adapter using the Insight Setup Wizard.

TIBCO Scribe® Insight And Adapters Release

  1. If the Scribe Setup Wizard is not running, from the Scribe Insight folder, run Setup.exe.
  2. Select Insight Adapters and click Start Installation. The Adapter Installation window displays after Insight is installed.
  3. Select the adapter(s) you want to install. Make sure to select the adapter that matches your version of Dynamics NAV.
  4. Click OK.
  5. Follow the instructions for the Setup Wizard for each adapter.
  6. When you have finished, click Exit to close the Scribe Insight Setup Wizard.

    Note: When you restart the Workbench, you may be prompted to register your adapter, depending on your licensing. Click Help > Upgrade License. Either copy/paste or enter the adapter unlock code you received from the TIBCO Registration Service.

Next step

See Also

Uninstalling The Adapter